Products

Rigid Films

We offer a range of products for thermoforming and form-fill-seal applications ranging from high clarity food packaging and specialist recycled products to non-food applications. All products are available with options such as anti-block by means of master batch, silicone coating and anti-fog coating.

Request a quote

Guaranteed

Quality rigid films produced by a company that takes pride in what they do.

Service

Our strategic geographical footprint through Europe allows us to be close to or customers so that we can providing a more flexible and reliable source of film supply with shorter lead times and lower transport costs. Understanding that punctuality from order is key in meeting your deadlines.

Safety

We believe that , preparation, understanding of risks, and development of decision trees prevent problems. We have this covered through BRC and supply chain transparency provide you with piece of mind.

Design

Every product we offer is designed for a purpose and has a valued place in our customers needs. Our design and product innovation evolves to meet the future trends within our market. If there is something you need that is not in our current range, we could be thinking about it. Just ask.

Showing

12 Products

Filter by
Filter by

Filters

  • ALL Rigid Films

Eco – Form provides a lower cost alternative to conventional APET / RPET. Available in opaque or coloured material, Eco – Form has excellent processing characteristics and a lower density that APET/ RPET.

Utilses post industrial APET/PE recyclate to reduce a major source of landfill waste. 90% recycled material.

Sustainability

SpecificationsProperties / Benefits
Material Thickness180my – 1.2myA-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Gauge Tolerance180mu – 400mu +/- 5% > 400mu +/- 3%Ease of forming leading to higher cycle speeds
Sheet Width300mm – 1100mmEase of cutting resulting in less wear on steel rule knives
Width Tolerance1% +/-Improved impact resistance at low temperatures compared to APET/RPET
Core Dimensions3″ (76mm) or 6″ (152mm)Retains excellent gas barrier properties
Packing SpecificationTailored to CustomerApplication: SOT’s, Insert Trays, Confectionery, Pre-formed food trays, Non Food Trays.
Anti BlockSilicon or Masterbatch
Roll DiameterMax 1000mm O/D
ColouredNo
MarketForm-filled-seal & thermoforming
Properties / Benefits
A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Ease of forming leading to higher cycle speeds
Ease of cutting resulting in less wear on steel rule knives
Improved impact resistance at low temperatures compared to APET/RPET
Retains excellent gas barrier properties
Application: SOT’s, Insert Trays, Confectionery, Pre-formed food trays, Non Food Trays.

For a number a number of reasons, billions of plastic containers find their way to landfill sites every year rather than being recycled for re-use. Breakdown-PET provides end-of- life solution to these discarded containers, enabling them to naturally decompose in a few years rather than centuries.Breakdown-PET is a revolutionary biodegradable* PET (Polyethylene Terephthalate) film for the thermoformed packaging industry. Breakdown-PET is a recyclable AND biodegradable* PET film with all of the conventional properties of PET.

Biodegration rates of Breakdown-PET plastic materials are measured according to the ASTM D5511 test method for determining anaerobic biodegration of plastics under water high solids anaerobic digestion conditions. Tests are generally conducted using 50% solids content. Solids content in naturally wetter landfills range from 55% to 65%, while the driest landfills may reach 93%. Actuall biodegration rates will vary in biology-active landfills according to the type of plastic used, the product configuration, and the solid content, temperature and moisture levels of the landfill.

Sustainability

SpecificationsProperties / Benefits
Material Thickness180my – 1.2myExcellent gas barrier properties
Gauge Tolerance180mu – 400mu +/- 5%A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Sheet Width300mm – 1100mmLower carbon impact compared to virgin material
Width Tolerance1% +/-90% recycled content
Core Dimensions3″ (76mm) or 6″ (152mm)70% post consumer content
Packing SpecificationTailored to CustomerPost consumer content food approved without the need for virgin capping layer
Anti BlockSilicon or MasterbatchAvailable with anti-fog/mist surface coating
Roll DiameterMax 1000mm O/DApplications: Pre-formed food trays, Medical, Personal Care, Non Food, Thermoform – Fill – Seal
ColouredYes
MarketForm-filled-seal & thermoforming
Properties / Benefits
Excellent gas barrier properties
A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Lower carbon impact compared to virgin material
90% recycled content
70% post consumer content
Post consumer content food approved without the need for virgin capping layer
Available with anti-fog/mist surface coating
Applications: Pre-formed food trays, Medical, Personal Care, Non Food, Thermoform – Fill – Seal

A specially formulated laminated R-PET sheet unique to TDX. Significant investment in the latest Supercleaning technology enables us to manufacture RPET sheet with 90% recycled content (70% Post Consumer Content) and maintain excellent product quality and processing characteristics. The addition of a specially formulated laminate enables optimum tray performance in VSP (Vacuum Skin Pack) applications.

90% recycled content (70% Post Consumer Content).

Sustainability

SpecificationsProperties / Benefits
Material Thickness240my – 850myExcellent gas barrier properties
Gauge Tolerance240mu – 399mu +/- 5%Excellent sealing properties and peel characteristics for VSP.
Sheet Width300mm – 1100mmProcessed using an EFSA (EC 282/2008) registered super-cleaning process
Width Tolerance1mm +/-Lower carbon impact compared to virgin material
Core Dimensions3″ (76mm) or 6″ (152mm)90% recycled content
Packing SpecificationTailored to Customer70% post consumer content
Anti BlockSilicone coated one side onlyPost consumer content food approved without the need for virgin capping layer
Roll DiameterMax 1000mm O/DApplications: Vacuum Skin Packaging (VSP) – Pre-formed food trays and Thermoform – Fill – Seal applications
ColouredYes
MarketForm-filled-seal & thermoforming
Properties / Benefits
Excellent gas barrier properties
Excellent sealing properties and peel characteristics for VSP.
Processed using an EFSA (EC 282/2008) registered super-cleaning process
Lower carbon impact compared to virgin material
90% recycled content
70% post consumer content
Post consumer content food approved without the need for virgin capping layer
Applications: Vacuum Skin Packaging (VSP) – Pre-formed food trays and Thermoform – Fill – Seal applications

Film with PETg / PET / PETg structure, high glossy and heat sealable film

Can be used post consumer bottle flakes from (the % depends on specific formulation) PURE decontaminate process EFSA approved. We can work to reduce the thickness of the film in order to save plastic, and redesign the packaging in order to maintain the same properties of the final packaging.t's designed for recycling in compliance with the main European Guideline in order to facilitating recycling processes.

Sustainability

SpecificationsProperties / Benefits
Material Thickness180my - 800myProcessed using an EFSA (EC 282/2008) registered supercleaning process
Gauge Tolerance-/+ 10% standard, -/+ 5% as option for all thicknessesLower carbon impact compared to virgin material
Sheet Width300mm - 1100mmPossible use of recycled content
Width Tolerance-0/+1mmAvailable with anti-fog/mist surface coating
Core Dimensions3″ (76mm) or 6″ (152mm)
Packing SpecificationTailored to Customer
Anti BlockSilicon or Masterbatch
Roll DiameterMax 1000mm O/D
Properties / Benefits
Processed using an EFSA (EC 282/2008) registered supercleaning process
Lower carbon impact compared to virgin material
Possible use of recycled content
Available with anti-fog/mist surface coating

APET film for low temperature. Suitable for freezing applications for lower than 0°C, where standard APET based films are not suitable. Freezing down to -30°C. Thermoformability is the same of standard APET film.

Thermoformed trays, thermoformed cups, disposable containers. Where the packaging is stored or transported frozen. The sealing layer for this film must be PE.

Can be used post consumer bottle flakes (the % depends on specific formulation) from PURE decontaminate process EFSA approved. We can work to reduce the thickness of the film in order to save plastic, and redesign the packaging in order to maintain the same properties of the final packaging.

AMB IT has the PURE decontaminate process EFSA approved and in AMB UK we have the deCON system, ESFA approved.

Sustainability

SpecificationsProperties / Benefits
Material Thickness220my - 800myExcellent gas barrier properties
Gauge Tolerance-/+10%Processed using an EFSA registered supercleaning process
Sheet Width150mm - 1420mmPost consumer content food approved .
Width Tolerance-0/+1mmLower carbon impact compared to virgin material
Core Dimensions3″ (76mm) or 6″ (152mm)
Packing SpecificationTailored to Customer
Roll DiameterTailored to customer needs
ColouredNo
MarketForm-filled-seal & thermoforming
Properties / Benefits
Excellent gas barrier properties
Processed using an EFSA registered supercleaning process
Post consumer content food approved .
Lower carbon impact compared to virgin material

This product works with

For the top film AMB can offer a finished multilayer film peel or reseal on PET. For converting companies, AMB can offer blown film suitable for printing and lamination, peel or reseal on PET.

Film made with different substrates laminated outline with adhesive. It's possible to print internally or outside the structure, or both. One or more of the substrate could be a semifinished film for converters produced inhouse. Otherwise we could laminate different substrates that we buy externally.

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness12my up to 650myPrinted options
Gauge Tolerance-/+10%Suitable for lamination external & internal
Sheet Width600mm up to 1325mmAnti-fog lacquer or lacquered
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockYes, depends on composition of substrates
Roll DiameterTailored to customer needs
ColouredYes, depends on composition of substrates
MarketsFFS machine, tray sealer
Properties / Benefits
Printed options
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Available with anti-fog/mist surface coating

Blown film, from 3 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness20my up to 180mySemi finished films
Gauge Tolerance-/+10%Printed option
Sheet Width350mm up to 2100mmSuitable for lamination external & internal
Width Tolerance-0/+1mmAnti-fog lacquer or lacquered
Core Dimensions3″ (76mm) or 6″ (152mm)Peel, burst peel or re-closable
Packing SpecificationTailored to CustomerUp to 9 layers
Anti BlockYes, depends on composition of substratesCustomizable structure
Roll DiameterTailored to customer needsSilver/silver or gold/silver, film for metallization
ColouredYes, depends on composition of substrates
MarketConverting
Properties / Benefits
Semi finished films
Printed option
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization

Blown film, from 5 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness30my up to 180mySemi finished films
Gauge Tolerance-/+10%High barrier film
Sheet Width350mm up to 1960mmSuitable for lamination external & internal
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerCustomizable structure
Anti BlockYes, depends on composition of substratesSilver/silver or gold/silver, film for metallization
Roll DiameterTailored to customer needsPrinted option
ColouredYes, depends on composition of substrates
Market Converting
Properties / Benefits
Semi finished films
High barrier film
Suitable for lamination external & internal
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization
Printed option

APET film for high temperature, laminated outline with flexible blown film. Suitable for hot filling and microwave reheating. Hot filling version up to use till 85°C and microwave reheating up to 110°C.

Thermoformed trays, thermoformed cups, disposable containers. Where there is heat process during packaging or where the food is packed at high temperature. For food ready to eat and is necessary a re-heat in microwave. The sealing layer for this film must be PE

Can be used post consumer bottle flakes (the % depends on specific formulation) from PURE decontaminate process EFSA approved. We can work to reduce the thickness of the film in order to save plastic, and redesign the packaging in order to maintain the same properties of the final packaging.

Sustainability

SpecificationsProperties / Benefits
Material Thickness240my - 650myProcessed using an EFSA registered supercleaning process
Gauge Tolerance-/+10%Post consumer content food approved
Sheet Width150mm - 1325mm
Width Tolerance-0/+1mm
Core Dimensions3″ (76mm) or 6″ (152mm)
Packing SpecificationTailored to Customer
Anti BlockYes
Roll DiameterTailored to Customer
ColouredNo
MarketForm-filled-seal & thermoforming
Properties / Benefits
Processed using an EFSA registered supercleaning process
Post consumer content food approved

This product works with

For the top film AMB can offer a finished multilayer film weld, peel and reseal film on PE, with option EVOH. For converting companies, AMB can offer blown film suitable for printing and lamination, weld, peel or reseal on PE.

Film made with different substrates laminated outline with adhesive. It's possible to print internally or outside the structure, or both. One or more of the substrate could be a semifinished film for converters produced inhouse. Otherwise we could laminate different substrates that we buy externally.

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness12my up to 650myPrinted options
Gauge Tolerance-/+10%Suitable for lamination external & internal
Sheet Width600mm up to 1325mmAnti-fog lacquer or lacquered
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockYes, depends on composition of substrates
Roll DiameterTailored to customer needs
ColouredYes, depends on composition of substrates
MarketsFFS machine, tray sealer
Properties / Benefits
Printed options
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Available with anti-fog/mist surface coating

Blown film, from 3 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness20my up to 180mySemi finished films
Gauge Tolerance-/+10%Printed option
Sheet Width350mm up to 2100mmSuitable for lamination external & internal
Width Tolerance-0/+1mmAnti-fog lacquer or lacquered
Core Dimensions3″ (76mm) or 6″ (152mm)Peel, burst peel or re-closable
Packing SpecificationTailored to CustomerUp to 9 layers
Anti BlockYes, depends on composition of substratesCustomizable structure
Roll DiameterTailored to customer needsSilver/silver or gold/silver, film for metallization
ColouredYes, depends on composition of substrates
MarketConverting
Properties / Benefits
Semi finished films
Printed option
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization

Blown film, from 5 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness30my up to 180mySemi finished films
Gauge Tolerance-/+10%High barrier film
Sheet Width350mm up to 1960mmSuitable for lamination external & internal
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerCustomizable structure
Anti BlockYes, depends on composition of substratesSilver/silver or gold/silver, film for metallization
Roll DiameterTailored to customer needsPrinted option
ColouredYes, depends on composition of substrates
Market Converting
Properties / Benefits
Semi finished films
High barrier film
Suitable for lamination external & internal
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization
Printed option

APET mono film for high temperature. Suitable for hot filling and microwave reheating. Hot filling version up to till 85°C and microwave reheating up to 110°C.

Thermoformed trays, thermoformed cups, disposable containers. Where there is heat process during packaging or where the food is packed at high temperature. For food ready to eat and is necessary a re-heat in microwave. The sealing layer for this film must be PE

Can be used post consumer bottle flakes (the % depends on specific formulation) from PURE decontaminate process EFSA approved. We can work to reduce the thickness of the film in order to save plastic, and redesign the packaging in order to maintain the same properties of the final packaging.

AMB IT has the PURE decontaminate process EFSA approved and in AMB UK we have the deCON system, ESFA approved.

Sustainability

SpecificationsProperties / Benefits
Material Thickness200my - 800myProcessed using an EFSA registered supercleaning process
Gauge Tolerance-/+10%Post consumer content food approved
Sheet Width150mm - 1420mm
Width Tolerance-0/+1mm
Core Dimensions3″ (76mm) or 6″ (152mm)
Packing SpecificationTailored to Customer
Anti BlockYes
Roll DiameterTailored to Customer
ColourNo
MarketForm-filled-seal & thermoforming
Properties / Benefits
Processed using an EFSA registered supercleaning process
Post consumer content food approved

This product works with

For the top film AMB can offer a finished multilayer film peel or reseal on PET. For converting companies, AMB can offer blown film suitable for printing and lamination, peel or reseal on PET.

Film made with different substrates laminated outline with adhesive. It's possible to print internally or outside the structure, or both. One or more of the substrate could be a semifinished film for converters produced inhouse. Otherwise we could laminate different substrates that we buy externally.

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness12my up to 650myPrinted options
Gauge Tolerance-/+10%Suitable for lamination external & internal
Sheet Width600mm up to 1325mmAnti-fog lacquer or lacquered
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockYes, depends on composition of substrates
Roll DiameterTailored to customer needs
ColouredYes, depends on composition of substrates
MarketsFFS machine, tray sealer
Properties / Benefits
Printed options
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Available with anti-fog/mist surface coating

Blown film, from 3 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness20my up to 180mySemi finished films
Gauge Tolerance-/+10%Printed option
Sheet Width350mm up to 2100mmSuitable for lamination external & internal
Width Tolerance-0/+1mmAnti-fog lacquer or lacquered
Core Dimensions3″ (76mm) or 6″ (152mm)Peel, burst peel or re-closable
Packing SpecificationTailored to CustomerUp to 9 layers
Anti BlockYes, depends on composition of substratesCustomizable structure
Roll DiameterTailored to customer needsSilver/silver or gold/silver, film for metallization
ColouredYes, depends on composition of substrates
MarketConverting
Properties / Benefits
Semi finished films
Printed option
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization

APET mono with barrier. The barrier is without EVOH but with an additive barrier in mass. Ready to be recycled. High transparency compared to multimaterial films. High barrier film. Can reduce to value near to 0% the residual oxygen inside the packaging.

For the top film AMB can offer a PET peel and reseal film.

Can be used post consumer bottle flakes min.70% in ABA structure up to 100% R-PET from PURE decontaminate process EFSA approved. it's a mono material designed for recycling in compliance with the main European Guideline in order to facilitating recycling processes. It's a high barrier material without EVOH that affects the recyclability of PET stream.

AMB IT has the PURE decontaminate process EFSA approved and in AMB UK we have the deCON system, ESFA approved

Sustainability

SpecificationsProperties / Benefits
Material Thickness200mm - 800mmExcellent gas barrier properties
Gauge Tolerance-/+10%Ready to be recycled
Sheet Width150mm - 1420mmProcessed using an EFSA registered supercleaning process
Width Tolerance-0/+1mmLower carbon impact compared to virgin material
Core Dimensions3″ (76mm) or 6″ (152mm)Post consumer content food approved without the need for virgin capping layer
Packing SpecificationTailored to CustomerCan reduce to value near to 0% the residual oxygen inside the packaging.
Anti BlockSilicon or Masterbatch
Roll DiameterTailored to Customer
ColouredNo
MarketForm-filled-seal & thermoforming
Properties / Benefits
Excellent gas barrier properties
Ready to be recycled
Processed using an EFSA registered supercleaning process
Lower carbon impact compared to virgin material
Post consumer content food approved without the need for virgin capping layer
Can reduce to value near to 0% the residual oxygen inside the packaging.

This product works with

For the top film AMB can offer a finished multilayer film peel or reseal on PET. For converting companies, AMB can offer blown film suitable for printing and lamination, peel or reseal on PET.

Film made with different substrates laminated outline with adhesive. It's possible to print internally or outside the structure, or both. One or more of the substrate could be a semifinished film for converters produced inhouse. Otherwise we could laminate different substrates that we buy externally.

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness12my up to 650myPrinted options
Gauge Tolerance-/+10%Suitable for lamination external & internal
Sheet Width600mm up to 1325mmAnti-fog lacquer or lacquered
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockYes, depends on composition of substrates
Roll DiameterTailored to customer needs
ColouredYes, depends on composition of substrates
MarketsFFS machine, tray sealer
Properties / Benefits
Printed options
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Available with anti-fog/mist surface coating

Blown film, from 5 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness30my up to 180mySemi finished films
Gauge Tolerance-/+10%High barrier film
Sheet Width350mm up to 1960mmSuitable for lamination external & internal
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerCustomizable structure
Anti BlockYes, depends on composition of substratesSilver/silver or gold/silver, film for metallization
Roll DiameterTailored to customer needsPrinted option
ColouredYes, depends on composition of substrates
Market Converting
Properties / Benefits
Semi finished films
High barrier film
Suitable for lamination external & internal
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization
Printed option

Standard APET for thermoforming, on FFS and thermoforming machines. The composition of the film is 100% PET, with the possibility to use post consumer flakes. Ready to be recycled. High transparency compared to multimaterial films.

For the top film AMB can offer a PET peel and reseal film.

We can formulate varying post consumer content up to 100% R-PET using the Bandera PURE decontamination process or Starlinger deCON system. Both processes are EFSA approved for mono material in-direct contact with food.

Sustainability

SpecificationsProperties / Benefits
Material Thickness150my-1100myExcellent gas barrier properties
Gauge Tolerance-/+10%A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Sheet Width150mm - 1900mmOptional processing using an EFSA registered supercleaning process
Width Tolerance-0/+1mmLower carbon impact compared to virgin material
Core Dimensions3″ (76mm) or 6″ (152mm)Available with anti-fog/mist surface coating
Packing SpecificationTailored to CustomerPrinted
Anti BlockSilicon or MasterbatchFor the top film AMB can offer a PET peel and reseal film.
Roll DiameterMax 1000mm O/D
ColouredYes
MarketForm-filled-seal & thermoforming
Properties / Benefits
Excellent gas barrier properties
A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Optional processing using an EFSA registered supercleaning process
Lower carbon impact compared to virgin material
Available with anti-fog/mist surface coating
Printed
For the top film AMB can offer a PET peel and reseal film.

This product works with

For the top film AMB can offer a finished multilayer film peel or reseal on PET. For converting companies, AMB can offer blown film suitable for printing and lamination, peel or reseal on PET.

Film made with different substrates laminated outline with adhesive. It's possible to print internally or outside the structure, or both. One or more of the substrate could be a semifinished film for converters produced inhouse. Otherwise we could laminate different substrates that we buy externally.

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness12my up to 650myPrinted options
Gauge Tolerance-/+10%Suitable for lamination external & internal
Sheet Width600mm up to 1325mmAnti-fog lacquer or lacquered
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockYes, depends on composition of substrates
Roll DiameterTailored to customer needs
ColouredYes, depends on composition of substrates
MarketsFFS machine, tray sealer
Properties / Benefits
Printed options
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Available with anti-fog/mist surface coating

Blown film, from 3 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness20my up to 180mySemi finished films
Gauge Tolerance-/+10%Printed option
Sheet Width350mm up to 2100mmSuitable for lamination external & internal
Width Tolerance-0/+1mmAnti-fog lacquer or lacquered
Core Dimensions3″ (76mm) or 6″ (152mm)Peel, burst peel or re-closable
Packing SpecificationTailored to CustomerUp to 9 layers
Anti BlockYes, depends on composition of substratesCustomizable structure
Roll DiameterTailored to customer needsSilver/silver or gold/silver, film for metallization
ColouredYes, depends on composition of substrates
MarketConverting
Properties / Benefits
Semi finished films
Printed option
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization

APET film laminated with flexible blown film with EVOH barrier. Is possible with only virgin PET, with recycled PET and virgin functional barrier (ABA structure), or with decontaminated EFSA recycled flakes. The blown film could be laminated inline without adhesive, or outline with adhesive. The whole structure could be transparent, coloured, or bicolor. Is possible to add surface effect and a printing design

Can be used post consumer bottle flakes min.70% in ABA structure up to 100% R-PET from PURE decontaminate process EFSA approved. We can work to reduce the thickness of the film in order to save plastic, and redesign the packaging in order to maintain the same properties of the final packaging

Sustainability

SpecificationsProperties / Benefits
Material Thickness190my - 1100mmProcessed using an EFSA registered supercleaning process
Gauge Tolerance-/+ 10% standard, -/+ 5% as option for all thicknessesPost consumer content food approved
Sheet Width650mm - 1900mmLaminated option
Width Tolerance-0/+1mmPeel or burst peel
Core Dimensions3″ (76mm) or 6″ (152mm)Excellent gas barrier properties
Packing SpecificationTailored to CustomerA-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Anti BlockYesProcessed using an EFSA (EC 282/2008) registered supercleaning process
Roll DiameterTailored to CustomerLower carbon impact compared to virgin material
ColouredYes90% recycled content
MarketForm-filled-seal & thermoforming• Available with anti-fog/mist surface coating
Properties / Benefits
Processed using an EFSA registered supercleaning process
Post consumer content food approved
Laminated option
Peel or burst peel
Excellent gas barrier properties
A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Processed using an EFSA (EC 282/2008) registered supercleaning process
Lower carbon impact compared to virgin material
90% recycled content
• Available with anti-fog/mist surface coating

This product works with

For the top film AMB can offer a finished multilayer film weld, peel and reseal film on PE, with option EVOH. For converting companies, AMB can offer blown film suitable for printing and lamination, weld, peel or reseal on PE.

Film made with different substrates laminated outline with adhesive. It's possible to print internally or outside the structure, or both. One or more of the substrate could be a semifinished film for converters produced inhouse. Otherwise we could laminate different substrates that we buy externally.

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness12my up to 650myPrinted options
Gauge Tolerance-/+10%Suitable for lamination external & internal
Sheet Width600mm up to 1325mmAnti-fog lacquer or lacquered
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockYes, depends on composition of substrates
Roll DiameterTailored to customer needs
ColouredYes, depends on composition of substrates
MarketsFFS machine, tray sealer
Properties / Benefits
Printed options
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Available with anti-fog/mist surface coating

Blown film, from 5 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness30my up to 180mySemi finished films
Gauge Tolerance-/+10%High barrier film
Sheet Width350mm up to 1960mmSuitable for lamination external & internal
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerCustomizable structure
Anti BlockYes, depends on composition of substratesSilver/silver or gold/silver, film for metallization
Roll DiameterTailored to customer needsPrinted option
ColouredYes, depends on composition of substrates
Market Converting
Properties / Benefits
Semi finished films
High barrier film
Suitable for lamination external & internal
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization
Printed option

APET film laminated with flexible blown film. Is possible with only virgin PET, with recycled PET and virgin functional barrier (ABA structure), or with decontaminated EFSA recycled flakes. The blown film could be laminated inline without adhesive, or outline with adhesive. The whole structure could be transparent, colored, or bicolor. Is possible to add surface effect and a printing design.

AMB IT has the PURE decontaminate process EFSA approved and in AMB UK we have the deCON system, ESFA approved

Can be used post consumer bottle flakes min.70% in ABA structure up to 100% R-PET from PURE decontaminate process EFSA approved. We can work to reduce the thickness of the film in order to save plastic, and redesign the packaging in order to maintain the same properties of the final packaging

Sustainability

SpecificationsProperties / Benefits
Material Thickness190my-1100 myA-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Gauge Tolerance-/+ 10% standard, -/+ 5% as option for all thicknessesProcessed using an EFSA (EC 282/2008) registered supercleaning process
Sheet Width300mm - 1100mmLower carbon impact compared to virgin material
Width Tolerance-0/+1mm90% recycled content
Core Dimensions3″ (76mm) or 6″ (152mm)Post consumer content food approved without the need for virgin capping layer
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockSilicon or Masterbatch
Roll DiameterMax 1000mm O/D
Properties / Benefits
A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Processed using an EFSA (EC 282/2008) registered supercleaning process
Lower carbon impact compared to virgin material
90% recycled content
Post consumer content food approved without the need for virgin capping layer
Available with anti-fog/mist surface coating

This product works with

For the top film AMB can offer a finished multilayer film weld, peel and reseal film on PE, with option EVOH. For converting companies, AMB can offer blown film suitable for printing and lamination, weld, peel or reseal on PE.

Film made with different substrates laminated outline with adhesive. It's possible to print internally or outside the structure, or both. One or more of the substrate could be a semifinished film for converters produced inhouse. Otherwise we could laminate different substrates that we buy externally.

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness12my up to 650myPrinted options
Gauge Tolerance-/+10%Suitable for lamination external & internal
Sheet Width600mm up to 1325mmAnti-fog lacquer or lacquered
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockYes, depends on composition of substrates
Roll DiameterTailored to customer needs
ColouredYes, depends on composition of substrates
MarketsFFS machine, tray sealer
Properties / Benefits
Printed options
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Available with anti-fog/mist surface coating

Blown film, from 5 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness30my up to 180mySemi finished films
Gauge Tolerance-/+10%High barrier film
Sheet Width350mm up to 1960mmSuitable for lamination external & internal
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerCustomizable structure
Anti BlockYes, depends on composition of substratesSilver/silver or gold/silver, film for metallization
Roll DiameterTailored to customer needsPrinted option
ColouredYes, depends on composition of substrates
Market Converting
Properties / Benefits
Semi finished films
High barrier film
Suitable for lamination external & internal
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization
Printed option

APET film for low temperature. Suitable for freezing applications for lower than 0°C, where standard APET based films are not suitable. Freezing down to -30°C. Thermoformability is the same of standard APET film. Thermoformed trays, thermoformed cups, disposable containers. Where the packaging is stored or transported frozen. The sealing layer for this film must be PET.

AMB IT has the PURE decontaminate process EFSA approved and in AMB UK we have the deCON system, ESFA approved

For the top film AMB can offer a PET peel and reseal film.

Can be used post consumer bottle flakes (the % depends on specific formulation) from PURE decontaminate process EFSA approved. We can work to reduce the thickness of the film in order to save plastic, and redesign the packaging in order to maintain the same properties of the final packaging.

Sustainability

SpecificationsProperties / Benefits
Material Thickness180mu - 800my90% recycled content
Gauge Tolerance180mu - 400mu +/-5% > 400mu +/3%A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Sheet Width150mm - 1420mmProcessed using an EFSA (EC 282/2008) registered supercleaning process
Width Tolerance-0/+1mmLower carbon impact compared to virgin material
Core Dimensions3″ (76mm) or 6″ (152mm)Post consumer content food approved without the need for virgin capping layer
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockSilicon or Masterbatch
Roll DiameterMax 1000mm O/D
Properties / Benefits
90% recycled content
A-B-A structure with virgin PET capping layer for optimal sealing and cutting performance
Processed using an EFSA (EC 282/2008) registered supercleaning process
Lower carbon impact compared to virgin material
Post consumer content food approved without the need for virgin capping layer
Available with anti-fog/mist surface coating

This product works with

For the top film AMB can offer a finished multilayer film peel or reseal on PET. For converting companies, AMB can offer blown film suitable for printing and lamination, peel or reseal on PET.

Film made with different substrates laminated outline with adhesive. It's possible to print internally or outside the structure, or both. One or more of the substrate could be a semifinished film for converters produced inhouse. Otherwise we could laminate different substrates that we buy externally.

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness12my up to 650myPrinted options
Gauge Tolerance-/+10%Suitable for lamination external & internal
Sheet Width600mm up to 1325mmAnti-fog lacquer or lacquered
Width Tolerance-0/+1mmPeel, burst peel or re-closable
Core Dimensions3″ (76mm) or 6″ (152mm)Up to 9 layers
Packing SpecificationTailored to CustomerAvailable with anti-fog/mist surface coating
Anti BlockYes, depends on composition of substrates
Roll DiameterTailored to customer needs
ColouredYes, depends on composition of substrates
MarketsFFS machine, tray sealer
Properties / Benefits
Printed options
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Available with anti-fog/mist surface coating

Blown film, from 3 to 9 layers. Suitable for a following lamination with adhesive to different substrates

Reduce materials that can cause difficulties in the recycling process: coating or additive barrier Maximum 5% by weight of the total structure

Sustainability

SpecificationsProperties / Benefits
Material Thickness20my up to 180mySemi finished films
Gauge Tolerance-/+10%Printed option
Sheet Width350mm up to 2100mmSuitable for lamination external & internal
Width Tolerance-0/+1mmAnti-fog lacquer or lacquered
Core Dimensions3″ (76mm) or 6″ (152mm)Peel, burst peel or re-closable
Packing SpecificationTailored to CustomerUp to 9 layers
Anti BlockYes, depends on composition of substratesCustomizable structure
Roll DiameterTailored to customer needsSilver/silver or gold/silver, film for metallization
ColouredYes, depends on composition of substrates
MarketConverting
Properties / Benefits
Semi finished films
Printed option
Suitable for lamination external & internal
Anti-fog lacquer or lacquered
Peel, burst peel or re-closable
Up to 9 layers
Customizable structure
Silver/silver or gold/silver, film for metallization

Want to make an order?

Get in touch with us

send a message